Tempered optiwhite glass (4mm thickness). Manufactured with a unique eco-solvent technology on a high-quality PVB film and laminated with a temperature-resistant tempered glass, the Splashbacks kitchen panels are the perfect addition to your kitchen, making tiling obsolete. Forget about cost- and time-effective kitchen renovations: the Splashbacks Glass Kitchen Panels take only a couple of minutes to assemble. The smooth, non-porous surface is designed to minimize the build-up of grease and bacteria which means less time spent cleaning.
Thanks to the innovative printing technology, you can enjoy a range of fantastic prints with high detail resolution and fantastic depth of colour for longer. We only use eco-solvent inks in our Splashbacks kitchen panels to ensure their vivid colors but also make sure they're 100% eco-friendly.What's more, your brand new glass panel doubles as a dry-erase board, so you can scribble your shopping list or a recipe while you do your magic around the kitchen. Once you're done, all you need to do is get some glass cleaner and a paper towel to erase the marker. Toughened Glass hardly ever get damage. Laminate layer gives extra protection and keeps the pieces together in the instance of breakage. With almost 15 years of experience, we can guarantee top quality products. The printed glass is rich in colour and got sharp details.
Printouts are highly durable on any fading. Printed glass is in modern design.
But with a variety of graphics, sizes and styles, it can match any interior, from contemporary office design to sunny living room or warm, sensual bedroom. Splashbacks are prepared to be fitted onto the wall by using any solvent and acid-free mounting glue for glass. We recommend to use Soudal Fix All Crystal glue. Apply glue on the safety layer tape DO NOT REMOVE TAPES' TOP YELLOW LAYER/FILM!An only small amount (bean size) imposed every few centimetres in the centre of each tape is enough. Please make sure that the surface of the wall is clean (grease and dust-free). Stick the panel on to the wall with force but sensible. Make sure it is evenly placed and support it to make sure it will remain in place for at least 24h of bonding time. MAKE SURE TO LEAVE 2 MILLIMETERS DILATATION GAP ON EACH EDGE. Splashbacks are suitable for all kinds of electric hobs. They are also suitable for GAS hobs, but under the condition that the gap between the burner is large enough so the heat from the burner will not reach the surface of the splashback.
Splashback is heat resistant, but direct heat from the fire can reach extremely high temperatures which could permanently damage the graphics. To check the gap, we advise placing the pan on the back burner, and the gap between the edge of the pot and splashback should be no less than 8 cm. The edge of the burner should not be closer than 19 cm from the splashback surface. Project Manager & Graphic Designer. We will individually prepare, especially design project with your own idea, so it will fit ideally into your vision.
Customised projects are quoted individually for price and time to produce and deliver. Let us help you to create something unique.